
How to use Nu Skin Facial Spa: A Step-by-Step Guide
If you are looking for a way to rejuvenate your skin and get a healthy, glowing complexion, then you have come to the right place. In this article, we will show you how to use Nu Skin Facial Spa on each area of your face, along with different spa treatments using the Conductive Gel.
But that’s not all! We will also cover whether you can use other Nu Skin products with your Facial Spa and how to use them effectively for optimal results. We understand that you want to get the most out of your device, so we have provided all the information you need to achieve your desired results.
So, whether you are a first-time user or an experienced spa enthusiast, keep reading to learn how to use Nu Skin Facial Spa and get the beautiful skin you deserve. Let’s get started!
General usage of your Nu Skin Facial Spa
Using your Nu Skin Facial Spa is a great way to give your skin a relaxing and rejuvenating experience. Here are some simple steps to follow:
Releasing a Conductor:
- Turn off the device and hold it with the chrome panel facing you.
- Press firmly on the release button with your thumb.
- Grasp the conductor on the sides and gently pull it off.
- Be careful not to pinch or hold the middle of the conductor as it can damage the device.
Attaching a Conductor:
- Turn off the device and hold it with the display side up.
- Place the conductor with the positioning indicator facing you and press firmly to snap it into place.
- Don’t force the conductor as it can damage both the device and the conductor.
Using Nu Skin Conductive Gel:
- Apply a generous amount of gel to the conductor and to the face treatment area.
- This gel is essential to ensure adequate conductivity.
Choosing the Spa Session Number:
- Press the selection button once to turn on the device.
- Use the selection button to scroll through the different spa session numbers.
- To select a spa session number, press the conductor against your face until you hear a beep.
During a Spa Session:
- The device display will be lit, and the device will beep every 10 seconds to indicate that it’s working.
- Keep the conductor in contact with your facial skin and ensure adequate moisture at all contact points.
- If you lose contact, the display will flash on and off, and the spa session timer will pause until you resume contact.
Spa Session Interruption:
- Keep the conductor in contact with your facial skin and ensure adequate moisture at all contact points.
- If you lose contact, the display will flash on and off, and the device will stop beeping until contact is reestablished.
- If the interruption lasts more than two minutes and the device turns off, restart the interrupted spa session.
Spa Session Completion:
- At the end of your session, the device will emit a long beep followed by two short beeps and automatically turn off.
- To manually turn the device off, press the spa session selection button until the display turns off.
Cleaning and Properly Storing Your Spa:
- After every use, turn off the device and wipe it and the conductors with a damp cloth to remove any excess gel.
- Check if gel has seeped between the device and conductor, and if so, remove all of it with a damp cloth.
- Dry the device and conductors thoroughly before storing them.
Conducting Facial Spa Regimens
There are two types of regimens you can use with your Nu Skin Facial Spa: the Basic Regimen and the Area Regimens.
The Basic Regimen is for the whole face and takes 10 minutes to complete. It has two spa sessions, each lasting five minutes.
The Area Regimens are for specific areas of the face and take five minutes to complete. Each Area Regimen also has two spa sessions, with the sessions lasting two and three minutes respectively.
Remember, no matter which regimen you choose, you must always use the Nu Skin Conductive Gel that comes with your Facial Spa to ensure the best results. Additionally, the size of the conductor you use will depend on the size of the area you are treating.
It is recommended that you do not conduct more than three Facial Spa regimens per week. This will help you achieve optimal results without overdoing it.
Facial Spa Basic Regimen
Entire Face
Area | Spa Session A | Spa Session B | Conductor |
![]() Entire Face | ![]() Number 4 (5 min) | ![]() Number 3 (5 min) | ![]() Face Conductor |
Spa Session A:
- Attach Conductor and Apply Gel: Connect the LARGE conductor to the device and put Nu Skin Conductive Gel (included) generously all over your face. Avoid putting it on your eyes, eyelids, and lips.
- Choose the Spa Session: Press the selection button to turn on the device and keep pressing it until you get to spa session number 4, which is indicated by a number 4 on the display with 5 small dots.
- Start the Spa Session: Hold the chrome plate with your moist hand, then touch the conductor to your face. The device will beep, meaning the spa session A has started. Slowly move the conductor over your face where you applied the gel, but keep away from sensitive areas (eyes, eyelids, lips, and throat).
When spa session A finishes, the device will beep once and then twice, letting you know that the spa session is done.
Spa Session B:
- Get Ready: Before proceeding to spa session B, put more Nu Skin Conductive Gel on areas where the gel may be drying out. Remember, you should have the LARGE conductor connected already.
- Choose the Spa Session: Press the selection button to turn on the device and keep pressing it until you get to spa session number 3, which is indicated by a number 3 on the display with 5 small dots.
- Start the Spa Session: Hold the chrome plate with your moist hand, then touch the conductor to your face. The device will beep, meaning the spa session B has started. Slowly move the conductor over the same areas as in spa session A, avoiding sensitive areas (eyes, eyelids, lips, and throat).
When spa session B finishes, the device will beep once and then twice, letting you know that the spa session is done.
Area Regimens
Around the Eyes (Periorbital)
Area | Spa Session A | Spa Session B | Conductor |
![]() Around the eyes | ![]() Number 1 (2 min) | ![]() Number 2 (3 min) | ![]() Spot Conductor |
Spa Session A:
- Attach Conductor and Apply Gel: Attach the SMALL conductor to the device and apply a generous amount of Nu Skin Conductive Gel to the facial skin above and below the eyes, avoiding the eyes and eyelids.
- Choose Spa Session Number: Turn on the device by pressing the selection button once, and then press it again to advance to the next spa session number. Keep pressing until the number 1 is displayed with 2 small dots.
- Conduct Facial Spa Session: With your moistened hand holding the chrome plate, touch the conductor to your facial skin. When you hear a beep, it means that spa session A is starting. Slowly glide the conductor around the eye area, but avoid sensitive or contraindicated areas such as the eyelids.
At the end of spa session A, the device will emit a long beep followed by two short beeps, indicating that the spa session is complete.
Spa Session B:
- Get ready: Before proceeding to spa session B, apply more Nu Skin Conductive Gel to any areas above or below your eyes where the gel has dried out. The SMALL conductor should already be attached.
- Choose Spa Session Number: Press the selection button once to turn on the device and keep pressing it to advance to the next spa session number until you reach the number 2 displayed with 3 small dots.
- Conduct Facial Spa Session: Hold the chrome plate with your moistened hand, and touch the conductor to your facial skin. The device will beep to indicate that spa session B is starting. Glide the conductor over the same areas as in spa session A, avoiding sensitive areas such as the eyelids.
At the end of spa session B, the device will emit a long beep followed by two short beeps, indicating that the spa session is complete.
JOWLS/CHIN
Area | Spa Session A | Spa Session B | Conductor |
![]() Jowls/Chin | ![]() Number 1 (2 min) | ![]() Number 2 (3 min) | ![]() Spot Conductor |
Spa Session A:
- Get Ready: Attach the SMALL conductor to the device and apply Nu Skin Conductive Gel generously to the facial skin around the jowl and chin area. Avoid sensitive or delicate areas like the lips and throat.
- Choose Spa Session: To start the session, press the selection button once to turn on the device, and then keep pressing it until you reach spa session A (number 1 with 2 small dots).
- Do the Spa Session: With your moistened hand, hold the chrome plate and touch the conductor to your facial skin. When the device beeps, it means spa session A has started. Move the conductor slowly around the jowl and chin area.
At the end of spa session A, the device will beep once for a long time followed by two short beeps, which means the session is complete.
Spa Session B:
- Get Prepared: Before starting the next session, apply more Nu Skin Conductive Gel to any jowl or chin area where the gel has dried out. The SMALL conductor should already be attached to the device.
- Choose Spa Session: Press the selection button to move to the next spa session number until you reach spa session B (number 2 with 3 small dots)
- Do the Spa Session: With your moistened hand, hold the chrome plate and touch the conductor to your facial skin. When the device beeps, it means spa session B has started. Move the conductor slowly over the same areas you covered in spa session A, avoiding sensitive areas like the lips and throat.
At the end of spa session B, the device will beep once for a long time followed by two short beeps, which means the session is complete.
FOREHEAD
Area | Spa Session A | Spa Session B | Conductor |
![]() Forehead | ![]() Number 5 (2 min) | ![]() Number 2 (3 min) | ![]() Face Conductor |
Spa Session A:
- Attach the Large Conductor: First, attach the large conductor to the device. Then, apply a generous amount of Nu Skin Conductive Gel to your forehead.
- Choose Spa Session Number: Press the selection button once to turn on the device, and then press it again to advance to the next spa session number. Keep pressing until the number 5 appears on the display with 2 small dots.
- Conduct Facial Spa Session: Hold the chrome plate with a moistened hand and touch the conductor to your forehead. The device will beep, indicating that spa session A is beginning. Slowly glide the conductor upward on your forehead, avoiding sensitive areas such as the eyes and eyelids.
Once spa session A is complete, the device will emit a long beep followed by two short beeps.
Spa Session B:
- Apply Additional Conductive Gel: Before starting spa session B, apply more Nu Skin Conductive Gel to the forehead where the gel may be drying out. Make sure the large conductor is still attached.
- Choose Spa Session Number: Press the selection button once to turn on the device and then again to advance to the next spa session number. Keep pressing until the number 2 appears on the display with 3 small dots.
- Conduct Facial Spa Session: Hold the chrome plate with a moistened hand and touch the conductor to your forehead. The device will beep, indicating that spa session B is beginning. Slowly glide the conductor over the same areas as in spa session A, avoiding sensitive areas such as the eyes and eyelids.
Once spa session B is complete, the device will emit a long beep followed by two short beeps
If you’re looking to learn how to use your Nu Skin Facial Spa, we’ve got you covered! Check out our instructional video for step-by-step guidance on how to get the most out of your device.
Can I use Nu Skin Facial Spa with Galvanic Spa products?
Yes, you can absolutely use your Nu Skin Facial Spa with the Galvanic Spa products.
According to Nu Skin’s documentation, the Nu Skin Facial Spa and the Galvanic Spa work in a similar way, using galvanic currents to push products deeper into the skin. This means that you can use the Nu Skin Facial Spa with ageLOC GS Facial Gels, Tru Face Line Corrector, ageLOC PowerMask, or ageLOC EyeMask to see faster results.
But hold on! Before you start using these products together, it’s important to understand how to use them correctly. Each product has a specific polarity and must be used with a specific treatment number. So, make sure to read the instructions carefully and follow them closely to achieve the best results.
In the following section, we’ll dive into how to use the Nu Skin Facial Spa with each product, providing you with a step-by-step guide for ageLOC GS Facial Gels, Tru Face Line Corrector, ageLOC PowerMask, and ageLOC EyeMask. So, if you’re curious about how to use these products together for a more effective skincare routine, keep reading!
How to use Nu Skin Facial Spa with ageLOC GS Facial Gels
If you’re looking for a way to visibly rejuvenate your skin, try using the Nu Skin Facial Spa with ageLOC GS Facial Gels three times a week. Follow the steps below to get started:
Preparation:
- Use your preferred Nu Skin cleanser before beginning the treatment.
- Attach the ageLOC Face Conductor to the device.
Product | Conductor | Setting |
![]() | ![]() | ![]() Number #1 for Pre-Treat & Number #2 for Treatment |
Pre-Treat Phase:
- Start by applying a full ampoule of the pre-treat gel evenly over your face and neck, avoiding sensitive areas like your lips, eyelids, and eyes.
- Press the selection button until the display shows the number 1. The treatment takes only two minutes.
- Get your hands wet with NaPCA Moisture Mist or water, grasp the device with a moist hand, and touch the chrome plate on the back. Glide the conductor head slowly over your skin, being cautious to avoid any sensitive areas.
- The device will automatically adjust to your skin and beep every 10 seconds to show it’s working. When the treatment is almost complete, it will beep every five seconds.
- After two minutes, the device will beep a long beep followed by two short beeps, indicating that the treatment is finished. Use a damp towel to clean any remaining gel from your skin and the device.
Treatment Phase:
- Start by applying a full ampoule of treatment gel to your neck and face while leaving the ageLOC Face Conductor still attached.
- Press the selection button to turn on the device, then keep pressing until you select treatment number 2. The treatment takes three minutes.
- Hold the device with a moist hand and touch the chrome plate on the back. Glide the conductor head slowly over your skin, avoiding sensitive areas.
- The device will beep every 10 seconds to let you know it’s working and beep every five seconds when the treatment is nearly finished, indicating that it has automatically adjusted to your skin.
- Once the treatment is complete, the device will emit a long beep followed by two short beeps and turn off automatically. Use a damp towel to wipe any remaining gel from your skin and the device .
How to Use Nu Skin Facial Spa with Tru Face Line Corrector
Use this treatment twice a day to soften the appearance of wrinkles and lines.
Preparation:
- Use your preferred Nu Skin cleanser before beginning the treatment.
- Attach the Spot Treatment Conductor to the Facial Spa device.
Product | Conductor | Setting |
![]() | ![]() | ![]() |
Treatment:
- Begin by applying Tru Face Line Corrector to the lines and wrinkles you want to target. Apply only one area at a time and leave a thin layer of product on your skin’s surface.
- Press the selection button until the number 3 is illuminated on the display, indicating a 5-minute treatment.
- Pro Tip: You can use the five minutes for more than one area being treated.
- Wet your hands thoroughly with NaPCA Moisture Mist or water, hold the device with a moistened hand, and touch the chrome plate on the back. Slowly glide the conductor head over your skin, avoiding sensitive areas such as your eyes, eyelids, and lips.
- The device will beep every 10 seconds to indicate it’s working and every 5 seconds when your treatment is almost finished.
- When your galvanic treatment is complete, the device will beep a long followed by two short beeps and turn off automatically. Repeat steps 1 through 3 for each targeted area. Massage any remaining product into your skin and use a damp towel to clean any leftover product from the device.
How to Use Nu Skin Facial Spa with ageLOC PowerMask
Get refreshed, hydrated, and plump-looking skin instantly with this luxurious treatment. Follow these steps:
Preparation:
- Use a Nu Skin cleanser and toner before the treatment.
- Attach the ageLOC Face Conductor to the device.
Product | Connductor | Setting |
![]() | ![]() | ![]() |
Treatment:
- Carefully unfold the mask and remove the mesh lining from one side.
- Apply the unlined side of the mask to your face, then remove the mesh lining from the other side and adjust the mask to fit your face.
- Press the selection button until the number 5 appears on the display. You can choose between a 2-minute treatment (selection number 5) or a more intense 5-minute treatment (selection number 4).
- Wet your hands with NaPCA Moisture Mist or water, then hold the device with a moistened hand while touching the chrome plate on the back. Slowly glide the conductor head over the mask, making sure to cover your entire face.
- The device will beep to indicate that it has automatically adjusted to your skin, and will beep every 10 seconds to show that it is working. It will beep every 5 seconds when your treatment is almost complete.
- When the treatment is over, the device will emit a long beep followed by two short beeps and turn off automatically. Remove any remaining product from the device with a damp towel.
- Relax and leave the mask on for 10-15 minutes after the galvanic treatment to allow your skin to absorb the beneficial ingredients.
- Remove the mask and massage any remaining product into your skin. Continue with your regular skincare routine to maintain the benefits of the Nu Skin Facial Spa.
How to use Nu Skin Facial Spa with ageLOC Eye Mask
Preparation:
- Cleanse and tone your skin with Nu Skin products.
- Attach the Spot Treatment Conductor to the device.
Product | Conductor | Setting |
![]() | ![]() | ![]() |
Treatment:
- Unfold the mask and remove the mesh lining from one side. Apply the unlined side to your face and adjust it to cover dark circles, crow’s feet, and the skin between and around the eyebrows.
- Set the device to selection number 5 for a 2-minute treatment or for a more intensive treatment use selection number 4 for a 5-minute treatment.
- Wet your hands and hold the device with a moistened hand while touching the chrome plate. Glide the conductor head over the mask.
- The device will beep every 10 seconds to indicate it’s working and every 5 seconds when your treatment is almost complete.
- When the galvanic treatment is over, the device will emit a long beep followed by two short beeps and turn off automatically.
- Use a damp towel to remove any remaining product from the device.
- After the galvanic treatment, leave the mask on for another 10-15 minutes.
- Remove the mask, massage any remaining product into your skin, and continue with your regular skincare routine.
Conclusion
In conclusion, the Nu Skin Facial Spa is an exceptional beauty device that can help you achieve a radiant and youthful-looking skin, diminish fine lines and wrinkles, and firm your skin’s texture. By following the steps provided in this article, you can use your Nu Skin Facial Spa effectively with the recommended products and achieve the desired outcomes.
If you want to know more about the Nu Skin Facial Spa and its advantages, we encourage you to check out our comprehensive review article. In our review article about Nu Skin Facial Spa we provide a detailed overview of the device’s features, its benefits, and the products that work best with it. Take advantage of this opportunity to enhance your skincare routine with the Nu Skin Facial Spa.